Hack Into Administrator Account
We are going to share with you all possible ways to hack admin or administrator account in windows XP.So guys get ready to hack your friends systems just in 2 minutes. (Mail- admin@iampirated.com for complete information)
There are four ways to hack the admin password:
1. Simply accessing Unprotected Administrator Account.
2. Hacking Through Net User Command.
3. Hacking Using the ERD(Emergency Rescue Disk) Commander.
4. Resetting admin password using Ubuntu Live CD or DVD.
Lets start from the first technique.
1. Simply Accessing the Unprotected Admin or Administrator account.
Step1: Start your computer.
Step2: Now let it start until the windows user's username appears as shown in snapshot below.....
Step3: As This Window Appears Press Ctrl+Alt +Delete (2 times).. Now the Windows like shown below appears,
Step4: Now as shown above Enter the Administrator on the Username box and press enter... Now you will be login in the admin account can easily rest the password...
For Resetting password you can follow two Procedures..
Procedure 1: Goto Start --> Control Panel --> User Accounts.. Now select the account whose password u want to reset.
Procedure 2 : Follow the Next method i.e hacking password through Net User Command.
Note: Hack 1 will only work if Administrator(default) is unsecured. i.e User as some other username like above shown figure...
2. Hacking admin or administrator account using net user command::
Note: This will work only when user has access of user account or some how he has been allowed or working in admin account.
Steps to hack admin account:
Step1: Goto the Start and click on Run and Type cmd and press Enter .
Step 2: Now type "net user" in the command prompt to obtain the All accounts on that computer.
Step 3: Now Select the account Which u want to Reset the Password.
Suppose that we want to Reset the Password of Administrator.
Now Type "net user Administrator * " Without quotes... and press Enter.
Step 4: Now after that press Enter Twice to rest the password. Now Next time u open that Account .. It will not require any Password..
3. Hacking admin account using ERD commander (100% working hack)::
This hack has no restrictions , using this hack you can hack each and every computer.
First of all Download the ERD(Emergency Rescue Disk) commander... Extract the Files and Make a CD.(Mail- admin@iampirated.com for Complete Information)
STEPS INVOLVED :
1. Insert the ERD Commander Boot CD into the drive and restart the system
2. Boot the computer using ERD Commander Boot CD. You may have to set the boot order in the BIOS first.
3. Select your Windows XP installation from the list.
4. From the ERD Commander menu (Start menu), click System Tools and click Locksmith
Select the administrator account from the list for which you want to reset the password.
Restart The System and take the CD out of the Drive..And Enjoy Admin account...
Method 4: Resetting windows password using Ubuntu Live CD or DVD
For this hack you will require the Ubuntu Live CD.
Steps involved :
1. Insert Ubuntu Live CD and boot from it.
2. Open terminal and install chntpw in Ubuntu. To do so use the following commands.
sudo apt-get update
sudo apt-get install chntpw
3. Now mount your Windows volume. In my case it was dev/sda1. Replace it with yours.
sudo mkdir /media/WINDOWS
sudo mount /dev/sda1 /media/WINDOWS
4. Now navigate to the Windows configuration folder.
cd /media/WINDOWS/WINDOWS/system32/config/
5. To reset the administrator password enter
sudo chntpw SAM
6. After completing this command you will see 5 different choices. Select the 1st one and press Enter and its done.
7. Now restart your system, it will not ask any password.
Please note that I use email encryption - email me for more info about sending encrypted email.
Improve your Margins
The Pirated Intelligence
Add Copy To / Move To on Right-Click Menu of Windows 7 or Vista
Here’s the quick registry hack to get this working. As usual, back up your registry just in case. You will want to browse down to this key:
HKEY_CLASSES_ROOT\AllFilesystemObjects\shellex\ContextMenuHandlers
Once you are at that key, right click and choose the New Key option:
Now you will double-click on the (Default) value and enter the following:
{C2FBB630-2971-11D1-A18C-00C04FD75D13}
Click OK and continue.
If you want to enable Move To, you will repeat the same steps, except creating a new key named Move To, and using this value:
{C2FBB631-2971-11D1-A18C-00C04FD75D13}
Now when you right click on a file or folder, you should see the following options:
Let’s click Copy To Folder just to see what happens….
How To Configure IP Address and DNS from Command Line In Windows 7
The IP address of your computer can be set from the command prompt by running the following commands at an administrative level prompt:
netsh interface ip set address name="Local Area Connection" static 123.123.123.123 255.255.255.0 123.123.123.1 1
Local Area Connection is the name of the adapter you want to modify. In single NIC systems it is normally called Local Area Connection.
123.123.123.123 is the IP address you want to set.
255.255.255.0 is the subnet mask.
123.123.123.1 is the gateway.
1 is the gateway metric. You can leave this as 1 for almost all cases.
If you want to enable DHCP you can run:
netsh interface ip set address name="Local Area Connection" dhcp
There are two commands for DNS since administrators typically configure a primary and secondary DNS server.
For the primary DNS run:
netsh interface ip set dns name="Local Area Connection" static 208.67.222.222
For the secondary run:
netsh interface ip add dns name="Local Area Connection" 208.67.220.220 index=2
If you want to configure the computer to use DNS from DHCP run:
netsh interface ip set dnsservers name="Local Area Connection" source=dhcp
When you are finished with all of your IP and DNS changes run ipconfig -all to review the new settings.
Encrypt Removable USB Flash Drives with BitLocker In Windows 7
BitLocker was Microsofts first move into full disk encryption with support included in Windows Vista. Since then BitLocker has evolved and improved into a great software based full disk encryption solution.
New for Windows 7 is support for removable disks. Using BitLocker on a removable USB flash drive provides a great way to protect your data in the event the drive was lost or stolen.
Not only will your data always be protected but it is possible to access your data on Windows XP and Vista through a read-only interface that is installed during the initial encryption. Now you are able to get your data anywhere, not just on your Windows 7 computer.
To get started you will need to plug in your USB flash drive and open Computer so you can view all your drives. Then, right click on your drive and select Turn on BitLocker.
Next, pick how you want to protect the drive. Set a password or use a smart card if your device has a smart card reader.
Click Next to continue.
It is a good idea to backup your recovery key so that you can always retrieve data in the event you forget your password.
Click Next to continue and then click Start Encrypting.
Encryption will now start. Depending on the size of your USB flash drive it can take a while. It took 24 minutes for my 8 GB drive.
When encryption is completed your drive is now protected.
Using BitLocker encrypted USB flash drive on another computer
When you plug your USB flash drive into a different computer it will still show up in Computer but the drive will have a different icon.
Once authenticated, you will be see the special read-only interface where you can extract files off the encrypted USB flash drive.
How To Create a System Repair/Recovery Disc In Windows 7
New in Windows 7 is the ability to create a system repair CD that will help you recover your computer from serious errors preventing windows from starting up. The recovery disc is based on Windows PE (Windows Preinstallation Environment)and includes the standard recovery options that are found on any Windows 7 installation disc.
If you have a Windows 7 installation disc, that doubles as a repair disc so you don’t need another. This article is only useful for users that have Windows 7 pre-installed and did not receive the installation media with their computer.
Creating the disc is very simple. Just click on the start button and type in recdisc.exe and press Enter.
Once started, put in a CD-R or CD-RW into your burner and click Start Burning.
How To Change Logon Screen In Windows 7
The Application Logon Changer for Windows 7 provides an easy way to customize the logon screen background with just a few clicks. Simply download the free application, run it and click Change Logon Screen.
The application will prompt for the location of the new background image and then install the new screen behind the scenes. Logon Changer will even provide a preview of your new background on a logon screen.
When you have settled on a good logon background, click the Test button to see it in action.
* Automatic Image Resize - Don't worry about the 245KB file size limit imposed by Microsoft. The Logon Changer will give you the option to automatically resize and recompress the image to the highest quality possible. The original image is left untouched.
* Automatic Image Backup - All OEM backgrounds and any previously used backgrounds are automatically backed up when a logon background is changed.
* Absolutely Free - Just tell your friends about this Application :)
If you want the default Windows 7 logon screen back just click Revert to Default Logon Screen and the application will automatically uninstall any customized screens.
Click here to download Windows 7 logon changer
Logo
